Timber Floor installation Sydney

Australian owned and operated since 1983.

Get a Free Quote

What really goes into installing timber flooring?

Timber flooring is more than just choosing the right boards. The subfloor, installation method, sanding, and finishing all play crucial roles in the final appearance and durability. Here’s what to expect when working with a professional timber flooring installer like AJ Flooring.

Subfloors: What You Need to Know

Your subfloor system influences how your floor feels and sounds.

Joists or Battens: These floors offer more spring and some vertical movement, especially in dry weather. Squeaks are common.
Plywood on Slab: Offers a firmer feel. May sound slightly ‘drummy’ in some areas.
Direct to Concrete: Similar firmness to plywood. Where under-slab heating is present, seasonal movement is more pronounced.

In these cases, engineered timber may be preferable due to its lower dimensional change.

Preparing for Sanding

Once your floor is laid, preparation for sanding is key:

Assessment: Check for cupping, gapping, and moisture.
Nail Punching: All nails should be punched at least 3mm below the surface.
Filling: Fill nail holes with colour-matched filler.
Cleaning: Thoroughly clean the floor to remove all dirt and grit.
Protection: Restrict access and prevent dust from settling on the floor.

The Sanding Process

Sanding occurs in multiple stages:

Level Sanding: Removes ridges and levels the floor.
Edging: Uses an edge sander to access corners and edges.
Initial Cuts: Sanded along the grain with a finer grit to remove coarse marks.
Final Sand: Prepares the floor for coating.

Each stage builds toward a smooth, flawless surface.

Choosing the Right Finish

Timber floor finishes fall into four main categories:

Penetrating Oils & Waxes: Natural look, affordable, high maintenance.
Oil-Modified Urethanes: Slightly more durable, spirit-based, yellow with age.
Solventborne Polyurethane: High gloss, durable, strong smell, intermediate cost.
Waterborne Polyurethane: Lower VOC, environmentally friendly, widest range of options, highest cost.

The right choice depends on your lifestyle, budget, and aesthetic preference.

Acoustic Considerations

Like all hard floors, timber transmits impact noise. In multi-residential dwellings, it’s crucial to meet acoustic performance requirements with the correct installation method.

Final Checks Before the Job is Complete

Once sanding and coating are complete, there are still a few important steps that ensure your floor not only looks stunning but performs as expected:

Inspection of finish quality: After the final coat is applied and has cured, the surface should be checked for evenness, clarity, and consistency in gloss level. AJ Flooring takes pride in ensuring a smooth, blemish-free finish that enhances the natural beauty of the timber.
Expansion gaps and trims: Professional installers will also confirm that appropriate expansion gaps are left at perimeter walls and under skirting or scotia. These gaps allow for natural timber movement and prevent the floor from buckling.
Trims and transitions: Where the floor meets tiles, carpet, or door thresholds, custom trims are often installed for a clean finish and to prevent damage at transition points.

What Sets AJ Flooring Apart

At AJ Flooring, we understand that the installation process is just as important as the timber itself. With decades of hands-on experience and a commitment to quality craftsmanship, we take a detailed, methodical approach to every stage – from subfloor preparation through to the final topcoat.

Whether your project involves a new build, renovation, or replacing existing flooring, we work closely with you to ensure expectations are exceeded. Our installers are not only skilled but also respectful of your home, maintaining a clean and safe work environment throughout the process.

Ready to transform your space with expertly installed timber flooring?

Get in touch with AJ Flooring today – let’s bring your vision to life with quality that stands the test of time.

Our Awards and Industry Recognition

We are proud to be recognised across the industry for outstanding workmanship and customer service. Our awards reflect years of commitment to quality and the trust Sydney homeowners continue to place in us.

Honoured For Excellence: 2023 Runner Up for Our Timber Deck

ATFA Winner: 2024 Pre-finished Stair NSW/ACT Winner

Trades Champions 2024 Finalist

Australian Small Business Champion Awards 2025 Finalist

Why Choose Us for Timber Floor installation in Sydney

Our clients choose us because we do more than install timber floors. We deliver dependable service, honest advice and flooring that stands the test of time. Our reputation is built on recommendations from homeowners and businesses across Sydney.

Over 40 Years of experience
Only Australian-made products
Responsive with competitive quotes
Best Value for money

Our reputation has been built on client recommendations, with homeowners and businesses across the region turning to us for reliable and professional service. Whether you’re renovating or fitting out a new space, our attention to detail ensures every timber floor installation in Sydney is finished to the highest standard.

When it comes to timber floor installation in Sydney, we use premium materials and proven techniques to create beautiful, long-lasting floors. We work closely with you to bring your vision to life, enhancing your property with the natural charm and durability of timber.

Choose A J Flooring for expert timber floor installation in Sydney, where quality craftsmanship and genuine customer care go hand in hand.

Sydney’s Trusted Timber Floor Installation Experts

Our Commitment

At A J Flooring, your satisfaction is our top priority. That’s why we dedicate our time, skill, and experience to delivering exactly what you envision for your hardwood timber flooring. As a trusted expert in timber floor installation in Sydney, we take pride in producing outstanding results that reflect our commitment to quality and customer service.

Our Process

Getting a new timber floor should be straightforward, not stressful. Our process covers everything from your first quote through to your final polish, so you know exactly what to expect at each step.

Expert Supervision & Unmatched Experience on Every Flooring Project

🏆 Meet David Smith – A True Timber Flooring Authority

David holds some of the highest qualifications in the industry, ensuring that your timber flooring project meets the strictest quality standards:

✔ Technical Timber Flooring Qualification – National Skills Training Organisation (RTO: 45438).
✔ Certified Supervisor – Licensed by Service NSW.
✔ ATFA Accredited Training – Completed over a dozen advanced courses, including:

Accessing Timber Floors – Ensuring the right flooring for the right space.
Advanced Floor Inspector – Identifying and resolving flooring issues with expert precision.
✔ Cert III & IV in Timber Technology – Mastery of timber characteristics, treatments, and installation techniques.

With David’s decades of expertise and advanced technical knowledge, you can trust that every flooring project is handled with the utmost skill, attention to detail, and professionalism.

Our Work – Stunning Timber Flooring Transformations

Avoid Costly Flooring Mistakes:

Learn how to spot red flags, ask the right questions, and ensure flawless results.

The Smart & Sustainable Choice: Why Wood is Better for Your Home and the Environment

Sustainable Timber Flooring with Bona Certified Finishes

Choosing a timber floor treated with Bona Certified finishes means choosing a healthier home and a lighter footprint on the planet. We use water-based, low-VOC products that protect your floors, your family and the environment.

At AJ Flooring, we believe that beautiful timber flooring should go hand in hand with environmental responsibility. That’s why we use Bona Certified finishes, a globally trusted solution for eco-friendly, durable, and safe floor treatments. With over 100 years of innovation, Bona leads the way in sustainable flooring solutions, ensuring that every finish we apply is designed to protect your floors, your home, and the planet.

Bona is dedicated to minimising environmental impact across the entire lifecycle of its products. Their sustainability commitment includes:

✔ Water-Based Finishes & Low VOC Formulas – Reducing air pollution and eliminating harmful chemicals found in traditional solvent-based finishes.
✔ Renewable & Biodegradable Ingredients – Designed to be safe for both indoor air quality and the environment.
✔ Non-Toxic, Low-Odour & Family-Friendly – Ideal for homes with children, pets, and allergy sufferers.

By choosing Bona Certified finishes, you are investing in a flooring solution that supports responsible resource use, cleaner indoor air, and a healthier planet.

Your Dream Timber Flooring Starts Here – Let’s Make It Happen!

✅ 100% Satisfaction Guarantee – We’re not happy unless you are.
✅ Multi-Award-Winning Timber Flooring Specialists – Trusted by homeowners & businesses.
✅ Locally Owned & Operated in the North Shore – Personalised service, no offshore call centres.
✅ Free, No-Obligation Quotes – Get expert advice with no pressure.

Proudly Providing Timber Flooring Services Across Sydney

Our teams are available in all of these areas and surrounding districts

FAQS

Still have questions? Here are some of the most common things Sydney homeowners want to know about installing timber floors.

What is Bona floor finish?

Bona floor finish is a high-quality finish applied to timber floors to protect & enhance their beauty. It is known for its durability and resistance to wear & tear. Contact AJ Flooring on 0408 659 109 for more details on bona floor finishing.

How do I maintain my timber flooring?

To maintain your timber flooring, it’s important to clean it regularly using a soft-bristled broom or vacuum cleaner. Avoid using harsh chemicals or abrasive cleaning tools that can damage the surface of the flooring. Additionally, it’s recommended to have your timber flooring professionally polished and resealed every few years to maintain its appearance and durability. AJ Flooring are flooring specialists in Sydney so call us on 0408 659 109.

Can timber flooring be repaired if it gets damaged?

Yes, timber flooring can be repaired if it gets damaged. A timber flooring specialist near you like AJ Flooring can assess the damage and provide recommendations for repair or replacement of the affected areas. Call 0408 659 109 for details.

What is timber flooring?

Timber flooring is a type of flooring made from solid or engineered wood. It is a popular choice for its durability, natural beauty, and versatility in design. Contact AJ Flooring on 0408 659 109 to find out about timber flooring and how it can enhance your property.

How do I choose the right type of timber flooring for my home or business?

Choosing the right type of timber flooring depends on several factors, including your design preferences, budget, and the level of foot traffic in the area where the flooring will be installed. A timber flooring specialist like AJ Flooring can provide advice and guidance to help you make an informed decision. Contact AJ Flooring on 0408 659 109 today.

How long does it take to install timber floorboards?

The installation time for timber floorboards depends on the size of the space and the complexity of the installation. It typically takes several days to complete the installation process, including preparation of the subfloor, laying the floorboards, and sanding and finishing the floor. Contact AJ Flooring on 0408 659 109 to discuss your timber floorboards installation.

Can I install timber flooring myself, or should I hire a professional?

While it’s possible to install timber flooring yourself, it’s recommended to hire a professional installer like AJ Flooring for the best results. A professional installer has the expertise, tools, and experience to ensure that the flooring is installed correctly and will last for years to come. For the best professional timber flooring installers near you, contact AJ Flooring on 0408 659 109.

How often should you clean timber floors?

Timber floors should be cleaned in high traffic areas once a week, with a damp mop. Low traffic areas can be done less frequently, like once a month or once a quarter. Unsealed wood floors are more susceptible to water, so make sure that the mop is just slightly damp. Contact AJ Flooring on 0408 659 109 for any advice when it comes to cleaning timber floors.

How long does it take to install timber floors?

Depending on the size of the planks and size of the room, installing timber floors can take one to three days to complete. However, you need to account for removal as well as any prep work that may be needed. It’s best to contact AJ Flooring on 0408 659 109 to install your timber floors. We offer free quotes.

Ready to transform your space with high-quality timber flooring? Contact A J Flooring today for a no-obligation quote and expert advice tailored to your home.